RO PLANT
1000 LPH
SPECIFICATION
Water treatment Plant with 1000 liter per hour flow rate is recommended for Industries and corporate offices. It is small mineral water plant at your premises. The Various industrial water demand for their point of use requirement. It is very affordable and low operating cost.
500 LPH PLANT
SPECIFICATION :
- We have designed this system to produce permeate flow 500 Liters per hour.
- Maximum TDS Level of Raw Water (input) upto 2500 ppm.
- The treated water quality as required i.e pH 7-8 after correction ,TDS <100 PPM & Hardness < 50 PPM can be achieve , subject to the feed water quality is the same as specified above .In case of any change in the quality of raw water it may have implication on operating parameters or on end results of the system.
- The system of recovery is properly maintained corresponding to the raw water TDS.
- RO feed water limiting conditions as mentioned below are strictly maintained.
100 LPH
SPECIFICATION:
- Ideal for Schools, Hospitals, Factories, Restaurants.
- No need to buy expensive water jar for drinking.
- 100% pure and safe water for your requirements.
- Require minimum space near your water cooler.
- Compatible with water cooler and water Dispenser.
- Purify any type of water like Underground water or Supply water.
- Auto cut-off and auto start with water level sensor (Optional part).
- Max duty cycle 500-700 ltr per day ( with 10 min. rest on every 2 hours)
- Easy to maintain and clean.